Menu
ICECO offers 5-year warranty on Secop compressor and 1 year for other parts.
Discount codes cannot be used again for products that have already been discounted. Discount codes cannot be stacked!
Shipping time typically takes 3-7 business days. And we currently have no expedited shipping service.
We are sorry, but due to the unique characteristics of our fridges, we are unable to ship to addresses in Hawaii (HI), Alaska (AK), Puerto Rico (PR), American Samoa, Guam, Micronesia, Marshall Islands, Northern Mariana Islands, Palau, and U.S. Virgin Islands.
When the temperature sensor detects that the internal temperature of the refrigerator has reached the set temperature, the compressor will stop working, causing the temperature inside the refrigerator to rise. Once the internal temperature of the refrigerator rises to a certain level, the compressor will resume operation to cool it down.
Battery protection refers to the function of a refrigerator that automatically stops operating when the voltage of the power source (car battery or external battery) drops below a certain set value. This prevents excessive depletion of the car battery or external battery, which could affect the normal ignition of the vehicle and the lifespan of the battery. There are three levels of protection: low, medium, and high.
When the car refrigerator is connected to an external power source, such as a portable power bank, in order to maintain continuous power supply from the battery, it is recommended to set it to the low level. This allows the external battery to work more efficiently.
When the ambient temperature is very low (during winter), the compressor operates less frequently and for shorter periods of time. This results in higher temperatures in the freezer compartment and incomplete freezing of frozen foods. In this situation, the low-temperature compensation switch should be turned on to force the compressor to operate, allowing the freezer compartment to reach its normal temperature.
Please try to long pressing the down arrow button to restart the right zone.
After the refrigerator reaches the set temperature, the compressor stops working for insulation, causing a slight temperature fluctuation, which does not affect the functionality of the refrigerator. After some time, the compressor will start working again for cooling. Temperature fluctuations in the range of 7-14°F are considered normal and may be due to the sensitivity of the temperature sensor causing these fluctuations.
Please check if the temperature sensor is malfunctioning. If replacing the temperature sensor still does not resolve the issue, it may be a malfunction in the refrigerator's control panel or module, causing incorrect displays. In this case, it may be necessary to replace the module or control panel.
This may be due to the excessive pressure endured by the solenoid valve and refrigerant, causing them to operate beyond their capacity. Additionally, high ambient temperatures may also lead to increased refrigerant pressure, resulting in a malfunction of the refrigerator's solenoid valve. We recommend placing the refrigerator in a cool environment for 1-2 hours and then restarting it to see if it returns to normal.
Please place the unit on the correct side and wait for at least 12 hours before plugging in.
No, connecting the unit to AC/DC power at the same time may cause a module to burn out.
Solar panels need to be connected with a battery to use, it can not directly power the fridge.
They can install solar panels on the APL55. You can click on this link to see how.
APL55+Solar panel
When the humidity in the surrounding air is high, moisture in the air can condense into water droplets when it comes into contact with the cooler surface of the refrigerator exterior. This is a normal physical phenomenon.
